Back to GoChess Robotic

Robot

32 articles

My robot is on but its LED isn't blinking yellow

No lights at all on a robot that is switched on usually means an interrupted software update. Power it down and up again.

Pieces aren't moving as expected

Start with cleaning the board and the bases of the pieces, a firm level surface and centered pieces, then find your specific issue.

My robot won't turn on or charge with USB-C

Power the robot off and on, check whether the app can find it, then charge it by USB-C for 2 hours and watch for the red charging LED.

A captured piece on the rim isn't recognized

How to capture, how to fix a "?" icon on the rim, and where the extra queens go so the app can tell them apart.

Robot unable to move pieces

A robot that can't move a specific piece, or any piece at all, needs our support team.

My robot doesn't start calibration

When the app stays on "Waiting for calibration" or goes back to "Positioning" after the board is mounted.

Why does board setup fail?

Setup can fail because of a robot problem mid-setup or a Bluetooth connection issue. Lift the board and check the robot lights: yellow means reposition to calibrate, red means the battery needs charging.

The robot drags the wrong piece

The robot drags the piece the app believes is in that square. Compare the virtual board and rim with the real ones, and resolve every "?" icon on the rim.

Pieces collide during setup or play

Collisions are usually caused by a dusty board, which reduces the robot grip, or by pieces that are not centered in their squares.

How long does a robot take per move?

Typically 2 to 7 seconds, depending on how far the robot has to drive, how many robots are available, and whether the move involves a capture. With a single robot on a far-side move, expect the lo

Why is 'Set up my board' missing or disabled?

The app has lost track of some of the pieces on the board. Autonomous setup is only offered when the app's picture of the board matches the sensors: every piece accounted for and identified.

'Robot lost its way': what does it mean and how is it fixed?

The robot hit a wall, lost its navigation reference or detected a motor issue, so it stopped and is waiting to be recalibrated. Lift the board, place the blinking-yellow robot on a corner mark until the light is steady green, mount the board and let it calibrate.

Should I place my robot manually on the docking station to charge?

No. The charging pins are delicate. Robots drive into them automatically when the battery is low, the app is closed or after long inactivity. If one needs charging, take it out and charge it with a USB-C cable.

How do I calibrate the robot and what should I check if positioning fails?

Place the robot precisely on a yellow corner marking, on a flat solid surface, away from strong side light. A steady green light means it is ready; then mount the board and the app calibrates all robots together.

How does the number of robots affect game performance?

One robot performs one task at a time. With 2, 3 or 4 robots tasks run in parallel, which shortens board setups, speeds up captures and lets part of the fleet charge while the rest keep working.

Does the robotic base have an internal battery?

No, the base must be connected to power via USB-C or powered through the chessboard connection. The robotic base must be plugged in for robots to charge.

How do I power on the robots?

Robots are powered on via a button located on the bottom of the unit.

Where can 'Set up my board' triggered at ?

Three places: At the end of a game: the "Set up my board" button appears at the bottom of the end-game screen. From the home screen, where it appears at the bottom for a few seconds, or an

Why does the app ask to centre the pieces at the start of a game?

Why: the knight has to drive between other pieces. If a pawn sits off-centre in its square, the passing robot can clip it, and then things get messy: sometimes it knocks the pawn over, sometim

Moved piece did not reach its destination

The robot completed its move, but the piece did not land exactly on target. It may need another centimetre or two, or the drag slipped. The app detects the mismatch and asks the customer to help. 1. *

Does it matter which corner the robot is placed on?

No. Any of the four corners works. Each corner has a slightly different line pattern on the grid (one corner has an extra line, another has none, and so on). The robot reads that pattern during ca

Where do the extra queens go?

1. Place both extra queens on the rim, in the side circles. 2. Put the one intended as the white queen closer to the white side of the board. 3. Put the one intended as the black queen close

The robot top LEDs do not turn green when positioned on the yellow marks

Work through these in order. They are sorted by how often they turn out to be the cause: 1. Reduce the light. Direct sunlight, a bright window or strong overhead light will prevent a green, becaus

Does USB power also charge the chessboard?

Yes. With the board mounted on the base and USB-C connected to the base, both the chessboard and any docked robot charge. The chessboard has its own battery, so it can be used unplugged as a stan

Can GoChess Wizard Alive run four robots?

Technically yes: the system handles up to four robots on any robotic board, including Wizard Alive. Commercially it ships with two. The plan is for customers to be able to buy additional robo

AI difficulty levels and Elo

There are 32 AI levels; level 8 is about 1200–1300 Elo.

What is voice activation and how is it enabled?

Hands-free move input for robotic play. The You speak the move and the robots execute it. Released to beta testers first. To enable it: 1. Open settings and turn on voice activati

How does the robot charge and what do the battery alerts mean?

The robot can be charged via the docking station or the USB-C port on its underside. • A green LED on the robot indicates 100% charge when using the cable. • On the docking station, the robot LED won

Can I charge robots manually?

Yes, you can charge robots using the USB-C port on the robot. This is recommended for long-term storage or if the robot fails to dock correctly.

How do I perform a piece capture correctly?

Lift the captured piece before placing the capturing piece, ensuring a slight gap (a fraction of a second) so the board detects the magnet position change. The captured piece should be placed in one o

How does the undo function work?

When you select undo, the robot physically returns the pieces to their previous positions, so no manual adjustment is required.

GoChess Robot Charging options and instructions

GoChess Robotic

About this product

GoChess Robotic

The self-moving robotic chessboard

Still need help?

Our support specialists are ready to assist you directly.

Contact support