My GoCube is still drifting even after the IMU Reset

If the cube on your app continues to drift after resetting the IMU, please perform a Firmware update.
** This feature is available ONLY for the latest version of GoCubes (shipped November 20, 2021) **

Just follow the following steps:

1.  Update your app to the latest version (Android 5.4, iOS 2.6)
2.  Make sure your cube is in a "Solved State"
3.  Click on the Hamburger menu at the top left corner
4.  Click on Load Cube State
5.  At the top right corner click on Advance -> Update Firmware
6.  Click on Update Firmware
7.  Wait for the operation to finish - don’t close the App or play with your cube during the process
8.  Once it is completed click on Quit Application and reopen it
9.  You will still see your cube drifting at this point, don't worry, this is normal
10.  Click on the Hamburger Menu again and Load Cube State
11.  Place the cube with the orange face facing upwards
12.  Follow the instructions on the screen and click the Reset IMU button
13.  Wait for the operation to finish
14.  If you still see your cube moves on the screen, please wait a few seconds it will stabilize itself 

You may also watch this video tutorial on How to Update Firmware